Pneumatic Union Tee
The EPE Union Tee is a three-way pneumatic fitting designed for air flow splitting or combining. With a one-touch push-in design, it enables single-to-dual air distribution or merging.
- Product Introduction
Yuyao Eshiong Pipe Fittings Technologies Co., Ltd. is one of the leading manufacturers and suppliers of pneumatic union tee in China. Please rest assured to wholesale bulk durable pneumatic union tee from our factory. All customized products are with high quality and competitive price. Also, free sample is available.
This T-shaped union tee features three quick-connect ports, engineered to split a single airflow into two branches or combine two lines into one. Precision internal seals and collets lock tubing securely at all three ends, preventing leaks under operating pressures. It is available in metric sizes (4mm to 16mm) and imperial sizes (5/32" to 1/2"), matching standard pneumatic tube specifications.
Performance Parameter
|
Material |
Tube Compatibility |
O-RING |
Fluid |
Working Pressure |
Negative Pressure |
Temperature |
|
Nylon |
Fit PU hose |
NBR |
Air |
0-1.0MPa |
-29.5 in Hg / -750 mmHg (10 Torr) |
32 ~ 140 °F / 0 ~ 60 °C |
Product Dimensions: EPE Union Tee
(Custom sizes are available upon request. Please contact us for specifications not listed here.)
|
Type) |
Model |
Type |
Model |
|
Tube (mm) |
Tube (inch) |
||
|
EPE04 |
04 |
EPE5/32 |
5/32 |
|
EPE05 |
05 |
EPE3/16 |
3/16 |
|
EPE06 |
06 |
EPE1/4 |
1/4 |
|
EPE07 |
07 |
EPE5/16 |
5/16 |
|
EPE08 |
08 |
EPE3/8 |
3/8 |
|
EPE09 |
09 |
EPE1/2 |
1/2 |
|
EPE10 |
10 |
||
|
EPE11 |
11 |
||
|
EPE12 |
12 |
||
|
EPE14 |
14 |
||
|
EPE15 |
15 |
||
|
EPE16 |
16 |
Packing：
1.PE bag and double corrugated carton packaging;
2.Carton size：35*25*35cm;
3.Packaging quantity differs among models. Please check with our customer service.
Key Features
T-shaped three-way design for airflow splitting or combining.
Three quick-connect ports for fast, tool-free tube installation.
Independent collets and seals at all ends ensure leak-proof connections
Compact form factor for efficient branching in complex layouts
Daily Maintenance & Care
- Cut tubing cleanly and deburr before insertion.
- Tighten the thread moderately; avoid over-tightening.
- Inspect for leaks after pressure/temperature changes.
- Use only with non-corrosive liquids.
- When disassembling, press release ring evenly and pull tube straight out.
Frequently Asked Questions
Hot Tags: pneumatic union tee, China pneumatic union tee manufacturers, suppliers, factory, Cross Branch Union Pneumatic Push in Fitting, Pneumatic Cross Union, Pneumatic Reduce Two Way Divider, Pneumatic Reducer Straight Union, Pneumatic Union Tee, Stem Union Pneumatic Push in Fitting
