BSPP G Thread Pneumatic Push In Fittings Elbow and Tee Full Set

These 5 pneumatic push-in fittings adopts standard BSPP G parallel pipe thread. The thread part is integrally turned from nickel-plated brass with pre-installed end-face O-ring.

Send Inquiry

Product Introduction

5 differentiated structures cover all pneumatic wiring demands including right-angle diversion, 45° gentle bend, 2-way air split and mid-line side air tapping:

EPL-G 90° G Thread Male Elbow: male thread screw into valve block for 90° vertical direction change;

EPLF-G 90° G Thread Female Elbow: hex female thread connects pressure gauges & male-thread accessories with right-angle turn;

EPLH-G 45° G Thread Male Elbow: 45° gentle elbow for low-resistance pipeline layout;

EPB-G G Thread Male Branch Tee: bottom male thread air inlet, two tube outlets split air into 2 equal branches;

EPD-G G Thread Male Run Tee: dual straight through main tube ports, side G male thread for auxiliary air tapping midway on main line;

Performance Parameter

Material	Tube Compatibility	O-RING	Fluid	Working Pressure	Negative Pressure	Temperature
Nylon	Fit PU hose	NBR	Air	0-1.0MPa	-29.5 in Hg / -750 mmHg (10 Torr)	32 ~ 140 °F / 0 ~ 60 °C

Product Dimensions:

(Custom sizes are available upon request. Please contact us for specifications not listed here.)

EPL-G G Thread 90° Male Elbow			EPLF-G G Thread 90° Female Elbow			EPLH-G G Thread 45° Male Elbow

Type	Model		Type	Model		Type	Model
Type	Tube (mm)	Male (G)	Type	Tube (mm)	Female (G)	Type	Tube (mm)	Male (G)
EPL04-M5	04	M5	EPLF04-M5	04	M5	EPLH04-M5	04	M5
EPL04-M6	04	M6	EPLF04-M6	04	M6	EPLH04-M6	04	M6
EPL04-G01	04	1/8	EPLF04-G01	04	1/8	EPLH04-G01	04	1/8
EPL04-G02	04	1/4	EPLF04-G02	04	1/4	EPLH04-G02	04	1/4
EPL06-M5	06	M5	EPLF06-M5	06	M5	EPLH06-M5	06	M5
EPL06-M6	06	M6	EPLF06-M6	06	M6	EPLH06-M6	06	M6
EPL06-G01	06	1/8	EPLF06-G01	06	1/8	EPLH06-G01	06	1/8
EPL06-G02	06	1/4	EPLF06-G02	06	1/4	EPLH06-G02	06	1/4
EPL06-G03	06	3/8	EPLF06-G03	06	3/8	EPLH06-G03	06	3/8
EPL06-G04	06	1/2	EPLF06-G04	06	1/2	EPLH06-G04	06	1/2
EPL08-G01	08	1/8	EPLF08-G01	08	1/8	EPLH08-G01	08	1/8
EPL08-G02	08	1/4	EPLF08-G02	08	1/4	EPLH08-G02	08	1/4
EPL08-G03	08	3/8	EPLF08-G03	08	3/8	EPLH08-G03	08	3/8
EPL08-G04	08	1/2	EPLF08-G04	08	1/2	EPLH08-G04	08	1/2
EPL10-G01	10	1/8	EPLF10-G01	10	1/8	EPLH10-G01	10	1/8
EPL10-G02	10	1/4	EPLF10-G02	10	1/4	EPLH10-G02	10	1/4
EPL10-G03	10	3/8	EPLF10-G03	10	3/8	EPLH10-G03	10	3/8
EPL10-G04	10	1/2	EPLF10-G04	10	1/2	EPLH10-G04	10	1/2
EPL12-G01	12	1/8	EPLF12-G01	12	1/8	EPLH12-G01	12	1/8
EPL12-G02	12	1/4	EPLF12-G02	12	1/4	EPLH12-G02	12	1/4
EPL12-G03	12	3/8	EPLF12-G03	12	3/8	EPLH12-G03	12	3/8
EPL12-G04	12	1/2	EPLF12-G04	12	1/2	EPLH12-G04	12	1/2
EPL14-G03	14	3/8	EPLF14-G03	14	3/8	EPLH14-G03	14	3/8
EPL14-G04	14	1/2	EPLF14-G04	14	1/2	EPLH14-G04	14	1/2
EPL16-G03	16	3/8	EPLF16-G03	16	3/8	EPLH16-G03	16	3/8
EPL16-G04	16	1/2	EPLF16-G04	16	1/2	EPLH16-G04	16	1/2

EPB-G G Thread Male Branch Tee			EPD-G G Thread Male Run Tee

Type	Model		Type	Model
Type	Tube (mm)	Male (G)	Type	Tube (mm)	Male (G)
EPB04-M5	04	M5	EPD04-M5	04	M5
EPB04-M6	04	M6	EPD04-M6	04	M6
EPB04-G01	04	1/8	EPD04-G01	04	1/8
EPB04-G02	04	1/4	EPD04-G02	04	1/4
EPB06-M5	06	M5	EPD06-M5	06	M5
EPB06-M6	06	M6	EPD06-M6	06	M6
EPB06-G01	06	1/8	EPD06-G01	06	1/8
EPB06-G02	06	1/4	EPD06-G02	06	1/4
EPB06-G03	06	3/8	EPD06-G03	06	3/8
EPB06-G04	06	1/2	EPD06-G04	06	1/2
EPB08-G01	08	1/8	EPD08-G01	08	1/8
EPB08-G02	08	1/4	EPD08-G02	08	1/4
EPB08-G03	08	3/8	EPD08-G03	08	3/8
EPB08-G04	08	1/2	EPD08-G04	08	1/2
EPB10-G01	10	1/8	EPD10-G01	10	1/8
EPB10-G02	10	1/4	EPD10-G02	10	1/4
EPB10-G03	10	3/8	EPD10-G03	10	3/8
EPB10-G04	10	1/2	EPD10-G04	10	1/2
EPB12-G01	12	1/8	EPD12-G01	12	1/8
EPB12-G02	12	1/4	EPD12-G02	12	1/4
EPB12-G03	12	3/8	EPD12-G03	12	3/8
EPB12-G04	12	1/2	EPD12-G04	12	1/2
EPB14-G03	14	3/8	EPD14-G03	14	3/8
EPB14-G04	14	1/2	EPD14-G04	14	1/2
EPB16-G03	16	3/8	EPD16-G03	16	3/8
EPB16-G04	16	1/2	EPD16-G04	16	1/2

Packing：

1.PE bag and double corrugated carton packaging;

2.Carton size：35*25*35cm;

3.Packaging quantity differs among models. Please check with our customer service.

Key Feature

Standard BSPP G parallel pipe thread, fully compatible with European pneumatic equipment.

Nickel-plated brass thread with pre-mounted O-ring, no PTFE tape required.

Standard push-in locking design, one-second assembly & disassembly.

5 structures cover all diversion & direction-change scenarios.

Complete full-size range for all mainstream pneumatic tubing.

Daily Maintenance & Care

Cut tubing cleanly and deburr before insertion.
Tighten the thread moderately; avoid over-tightening.
Inspect for leaks after pressure/temperature changes.
When disassembling, press release ring evenly and pull tube straight out.

Frequently Asked Questions

Q: Can these G thread fittings interchange with M / NPT thread connectors?

A: No. This series adopts BSPP British parallel G pipe thread exclusively for European imported equipment. Metric M thread & American NPT taper thread have different pitch and sealing standard with incompatible mating surfaces. All fittings come with pre-installed O-rings without PTFE tape needed.

EPL-G, EPLF-G, EPLH-G, EPB-G and EPD-G form a complete product line of BSPP G thread pneumatic elbows & tees. All models adopt nickel-plated brass thread, pre-installed O-rings to skip PTFE tape and low-resistance curved flow channels, universally matching 4~16mm metric PU air tubes and G1/8~G1/2 European standard pipe threads.

3 types of elbows cover 90° male direction change, 90° female instrument transition and 45° gentle bend for narrow cavities; 2 types of tees realize equal 2-way split from single air source and uninterrupted auxiliary air tapping midway on long main lines. This full set satisfies all pipeline direction change & air split demands of automation equipment.

← Previous: No Information

Next: BSPP G Thread Brass Straight Push In Fittings →

Send Inquiry