Push Fit Plug
The push-in plug is designed for unused pipelines in water treatment equipment. It inserts directly into PE tube ports without tools for quick sealing and leak prevention. It is a commonly used component for waterway system maintenance and modification.
- Product Introduction
The push-in water purifier plug is a dedicated accessory for temporarily or permanently blocking unused pipelines in water purification systems. Designed for push-in PE tube ports, it can be installed without tools by direct insertion, preventing water leakage and dust from entering the pipeline.
Common specifications include 1/4"" and 3/8"", compatible with most PE tube push-in ports of water treatment equipment. It is widely used to block unused lines in RO systems, water purifiers and dispensers, and can also temporarily seal outlets during equipment maintenance or modification to prevent water leakage or pipeline contamination.
Product Dimensions: PPLU Plug
(Custom sizes are available upon request. Please contact us for specifications not listed here.)
|
Type |
Model |
|
O.D(Inch) |
|
|
PPLU04 |
1/4 |
|
PPLU06 |
3/8 |
Packing：
1.PE bag and double corrugated carton packaging;
2.Carton size：35*25*35cm;
3.Packaging quantity differs among models. Please check with our customer service.
Key Features
Push-in design for quick, tool-free installation and removal.
Reliable sealing performance to prevent leaks and pipeline contamination.
Compact and practical, ideal for maintenance, modification and unused line blocking.
Daily Maintenance & Care
- Cut tubing cleanly and deburr before insertion.
- Tighten the thread moderately; avoid over-tightening.
- Inspect for leaks after pressure/temperature changes.
- Use only with non-corrosive liquids.
- When disassembling, press release ring evenly and pull tube straight out.
Frequently Asked Questions
You Might Also Like
